Suche

zur Hauptseite

Institut für Energie- und Klimaforschung

Navigation und Service


Zeitschriftenbeiträge 2008

; ; ;
Cyclic Voltammetry of La0.78Sr0.2FeO3-d and La0.78Sr0.2Co0.2Fe0.8O3-d Electrodes Interfaced to CGO/YSZ
Solid state ionics 179, 1080 - 1084 (2008) [10.1016/j.ssi.2008.02.028]  GO

; ; ; ; ;
Demonstration of a F-Design 4-Cells Stack Behaviour under Different Experimental Conditions
Journal of fuel cell science and technology 5, 011004-1 - 011004-5 (2008) [10.1115/1.2398952]  GO

; ; ; ;
Electrically Conductive Diffusion Barrier Layers for Metal-Supported SOFC
Solid state ionics 179, (2008) [10.1016/j.ssi.2008.03.002]  GO

; ; ;
Characterization of the Re-Oxidation Behaviour of Anode-Supported SOFCs
. Ceramic engineering and science proceedings 29, 33 - 44 (2008) [10.1002/9780470456347.ch4]  GO

; ; ;
Microstructure and Electrical Conductivity of Yttrium-Substituted SrTiO3: Influence of Starting Composition and Sintering Atmosphere
Journal of the European Ceramic Society 28, 811 - 820 (2008) [10.1016/j.jeurceramsoc.2007.07.022]  GO

;
Ceramic-based Anode Materials for improved Redox Cycling of Solid Oxide Fuel Cells
Fuel cells 8, 283 - 293 (2008) [10.1002/fuce.200800018]  GO

; ; ; ; ; ;
Ce0.8Gd0.2O2 - delta protecting layers manufactured by physical vapor deposition for IT-SOFC
Solid state ionics 179, (2008) [10.1016/j.ssi.2007.12.008]  GO

; ; ; ;
Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings
Journal of thermal spray technology 17, 115 - 123 (2008) [10.1007/s11666-007-9144-2]  GO

; ;
Study on instant droplet and particle stages during suspension plasma spraying (SPS)
Surface and coatings technology 202, 4355 - 4361 (2008) [10.1016/j.surfcoat.2008.04.009]  GO

; ; ; ; ; ;
New Generation Perovskite Thermal Barrier Coating Materials
Journal of thermal spray technology 17, (2008) [10.1007/s11666-008-9239-4]  GO

; ; ;
Perovskite-Type Strontium Zirconate as a New Material for Thermal Barrier Coatings
Journal of the American Ceramic Society 91, 2630 - 2635 (2008) [10.1111/j.1551-2916.2008.02472.x]  GO

; ; ; ;
Yb203 and Gd203 doped strontium zirconate for thermal barrier coatings
Journal of the European Ceramic Society 28, 3071 - 3081 (2008) [10.1016/j.jeurceramsoc.2008.05.013]  GO

; ; ;
Physical characterization of Y2O3-CeO2-TiO2 (YCT) mixed oxides and Ni/YCT cermets as anodes in solid oxide fuel cells
Journal of materials science 43, 7057 - 7065 (2008) [10.1007/s10853-008-3063-6]  GO

; ;
Detection of Melting Temperatures and Sources of Errors Using Two-Color Pyrometry During In-flight Measurements of Atmospheric Plasma-Sprayed Particles
International journal of thermophysics 29, 764 - 786 (2008) [10.1007/s10765-008-0422-0]  GO

; ;
Preliminary study on the TriplexPro TM-200 gun for atmospheric plasma spraying of yttria-stabilized zirconia
Surface and coatings technology 202, 4374 - 4381 (2008) [10.1016/j.surfcoat.2008.04.012]  GO

; ; ;
Influence of heat treatments on the mechanical properties of high-quality Ni-rich NiTi produced by powder metallurgical methods
Materials science and engineering / A 481-482, 630 - 634 (2008) [10.1016/j.msea.2006.10.215]  GO

; ; ; ;
Degradation phenomena in SOFCs with metallic interconnects
. Ceramic engineering and science proceedings 29, 91 - 102 (2008) [10.1002/9780470456309.ch9]  GO

; ; ; ; ; ; ;
MnCo1.9Fe0.1O4 Spinel Protection Layer on Commercial Ferritic Steels for Interconnect Application in SOFC
Journal of power sources 184, 172 - 179 (2008) [10.1016/j.jpowsour.2008.05.081]  GO

; ; ; ; ; ; ;
Reducing Degradation Effects in SOFC Stacks Manufactured at Forschungszentrum Jülich - Approaches and Results
Ceramic engineering and science proceedings 28, 65 - 77 (2008)  GO

; ; ; ; ; ;
Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC
Journal of the European Ceramic Society 28, 1801 - 1808 (2008) [10.1016/j.jeurceramsoc.2007.11.018]  GO

; ; ; ;
Improvement of EB-PVD thermal barrier coatings by treatments of a vacuum plasma-sprayed bond coat
Surface and coatings technology 203, (2008) [10.1016/j.surfcoat.2008.08.071]  GO

; ; ; ; ;
Screening of A-Substitution in the System A0.68Sr0.3Fe0.8Co0.2O3-Delta for SOFC Cathodes
Journal of the Electrochemical Society 155, B207 - B214 (2008) [10.1149/1.2818766]  GO

; ; ; ;
IT-SOFC supported on Mixed Oxygen Ionic-Electronic Conducting Composites
Chemistry of materials 20, 3867 - 3875 (2008) [10.1021/cm702508f]  GO

; ; ; ; ; ;
Effect of Manufacturing Related Parameters on Oxidation Properties of MCrAlY Bondcoats
Materials and corrosion 59, 463 - 470 (2008) [10.1002/maco.200804128]  GO

; ; ; ; ; ;
Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation
Journal of membrane science 320, 13 - 41 (2008) [10.1016/j.memsci.2008.03.074]  GO

; ;
From powder properties to fuel cell performance - a holistic approach for SOFC cathode development
Solid state ionics 179, 1509 - 1515 (2008) [10.1016/j.ssi.2007.11.037]  GO

;
Interface reactions between electrically conductive ceramics and ferritic steel in SOFC stacks: I. The system Cr-22Fe-0.5Mn/Mn2O3/(La,Ca)(Cr,Co,Cu)O3
Materials science and engineering / B 150, 135 - 140 (2008) [10.1016/j.mseb.2008.03.018]  GO

; ;
Microporous and mesoporous 8YSZ materials derived from polymeric acetylacetone-modified precursors for inorganic membrane applications
Journal of non-crystalline solids 354, 3723 - 3731 (2008) [10.1016/j.jnoncrysol.2008.03.048]  GO

; ; ; ;
Formation of clathrasil layers by secondary growth of DOH-type nuclei for gas separation applications
Microporous and mesoporous materials 115, 3 - 10 (2008) [10.1016/j.micromeso.2007.11.052]  GO

; ; ;
ZrO2 and TiO2 membranes for nanofiltration and pervaporation Part 2. Development of ZrO2 and TiO2 toplayers for pervaporation
Journal of membrane science 318, 413 - 421 (2008) [10.1016/j.memsci.2008.03.003]  GO

; ; ; ;
Manufacturing of new nano-structured ceramic-metallic composite microporous membranes consisting of ZrO2, Al2O3, TiO2 and stainless steel
Solid state ionics 179, 1360 - 1366 (2008) [10.1016/j.ssi.2008.02.046]  GO

; ; ;
Development of thin-film nano-structured electrolyte layers for application in anode-supported solid oxide fuel cells
Solid state ionics 179, 428 - 437 (2008) [10.1016/j.ssi.2008.02.010]  GO

; ; ; ; ; ; ; ;
Overview in the Field of Thermal Barrier Coatings Including Burner Rig Testing in the European Union
Seramikkusu 43, 371 - 381 (2008)  GO

; ; ; ; ; ; ; ; ;
Recent activities in the field of thermal barrier coatings including burner rig testing in the European Union
Advanced engineering materials 10, 907 - 921 (2008) [10.1002/adem.200800015]  GO

; ; ; ; ;
Advanced thermal spray technologies for applications in energy system
Surface and coatings technology 202, 4432 - 4437 (2008) [10.1016/j.surfcoat.2008.04.022]  GO

; ; ; ; ; ;
La2(Zr0.7Ce0.3)207- A new oxide ceramic material with high sintering-resistance
Materials letters 62, 2667 - 2669 (2008) [10.1016/j.matlet.2008.01.009]  GO

; ; ; ; ;
Laser glazing of lanthanum magnesium hexaaluminate
Optics and lasers in engineering 46, 601 - 603 (2008) [10.1016/j.optlaseng.2008.04.001]  GO

; ; ; ;
Powder Metallurgical Production of TiNiNb and TiNiCu Shape Memory Alloys by Combination of Pre-Alloyed and Elemental Powders
Journal of alloys and compounds 463, 250 - 256 (2008) [10.1016/j.jallcom.2007.09.081]  GO

Buchbeiträge 2008

; ;
Suface activated OTM for CO_2 emission free fossil power plants
Proceedings of the 12th Aachener Membran Kolloquium, 29.-30.10.2008, Aachen, Germany. - 2008. - 978-3-00-026060-5. - S. 317 - 322 (2008)

; ; ; ; ;
Influence of membrane thickness and activating layers on oxygen permeation of Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-delta) (BSCF) membranes
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: I-P55 (2008)

; ; ; ; ;
Current Trends of SOFC Development at Forschungszentrum Jülich
Proceedings of the 8th European SOFC Forum, Luzern, Schweiz, 2008 : EFCF 2008. - 2008. - CD, B0306 (2008)

; ; ; ; ;
Wettability and Interfacial Reaction between Glass Sealants and Ferritic Steel Interconnects in SOFCs
Proceedings of the 10th International Conference of the European Ceramic Society (ECerS-10) / ed.: J. G. Heinrich, C. G. Aneziris. - The European Ceramic Society, 2008. - S. 871 - 879 (2008)

; ; ; ;
Adaption keramischer Fertigungstechnologien für pulvermetallurgische Funktionsbauteile
27. Hagener Symposium 2008 : Neue Anforderungen - Neue Produkte - Neue Verfahren / ed.: H. Kolaska. - Witten, Heimdall-Verlag, 2008. - (Pulvermetallurgie in Wissenschaft und Praxis ; 24). - S. 215 - 241 (2008)

; ; ; ;
Applicability of 2C-MIM to produce near-net-shape components with graded porosity
Proceedings of EURO-PM 2008, Mannheim, Germany. - 2008. - S. 21 - 26 (2008)

; ; ; ;
Stack degradation in dependence of operation parameters; the Real-SOFC sensitivity analysis
Proceedings of the 8th European SOFC Forum 2008, Luzerne, Schweiz. - EFCF, 2008. - CD, B1002 (2008)

; ; ;
Development of nano-structured YSZ electrolyte layers for SOFC applications via sol-gel route
Proceeding 9th International Symposium on Ceramic Materials and Components for Energy and Environmental Application (CMCEE), Shanghai, China, 2008 (2008)

; ; ;
Preparation of thin graded YSZ Layers via sol-gel route
Proceedings of the 7th European SOFC Forum, Lucerne, Switzerland, June 30 - July 4, 2008 (2008)

; ;
Investigation of electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr
Electroceramics XI : CD-Tagungsband. - The European Ceramic Society, 2008. - Datei 0103 (2008)

; ; ; ; ;
Development of multilayered, nano-structured gas separation membranes supported by a metallic substrate
Proceedings of 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials 2008, Sendai, Japan. - 2008. - o.Z. (2008)

; ; ; ;
Preparation and Characterisation of Metal-Ceramic Hybrid Membranes
Proceedings of the 12th Aachener Membran Kolloquium, 29.-30.10.2008, Aachen, Germany. - 2008. - 978-3-00-026060-5. - S. 333 - 338 (2008)

; ; ; ;
Preparation and characterization of metal-ceramic hybrid membranes
Proceedings of the 12th Aachener Membran Kolloquium. - 2008. - S. 333 - 338 (2008)

; ; ; ;
Manufacturing and characterisation of metal-supported ceramic membranes for molecular sieving
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: IB04 (2008)

; ;
Development of a Thermally Sprayed Insulation Layer for SOFCc
Proceedings of the 8th European SOFC Forum 2008. - Luzern, Schweiz. - auf CD (2008)

;
Mikrostrukturanalyse der Prozessschritte zur Herstellung hochporöser, endkonturnaher NiTi-Formgedächtnislegierungen
Fortschritte der Metallographie / ed.: M. Rettenmayer, A. Kneissl. - Frankfurt, 2008. - (Praktische Metallographie ; Sbd. 40). - S. 131 - 136 (2008)

; ; ; ;
Relaxation stress behaviour of cylindrical stand alone YSZ coatings with and without segmentation cracks
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ; ; ;
Spraying process, microstructure, and relaxation stress behavior of cylindrical standalone YSZ coatings with and without segmentation
Proceedings of the International Thermal Spray Conference & Exposition 2008 (ITSC) / ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und Verwandte Verfahren, 2008. - S. 1095 - 1098 (2008)

; ; ; ;
Influence of Porosity on Thermal Conductivity and Sintering of Suspension Plasma Sprayed Thermal Barrier Coatings
Proceedings of the 32nd Ínternational Cocoa Beach Conference & Exposition on Advanced Ceramics & Composites, Daytona Beach, Florida, January 2008. - 2008. - CD, o.Z. (2008)

; ; ;
Near-net-shape fabrication of porous NiTi: Use as implant materials and energy-absorbers
i-sup 2008 : Innovation for Sustainable Production ; Conference Proceedings. - 2008. - Online (2008)

; ; ; ; ;
Production of Highly Porous Near-Net-Shape NiTi Components for Biomedical Applications
MetFoam 2007 Conference on Porous Metals and Metallic Foams : Conference Proceedings. - 2008. - S. 295 - 298 (2008)

; ; ; ; ; ;
Use of net-shaped NiTi with a defined porosity as energy-absorbers and implant materials
Proceedings of EURO-PM 2008, Mannheim. - 2008. - S. 101 - 106 (2008)

;
Solid oxide fuel cells based on Y-substituted SrTiO3 ceramic anodes
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0512 (2008)

; ; ; ; ; ;
New Generation Perovskite Thermal Barrier Coating Materials
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ;
Tools for Online Monitoring of Failure Evolution of Thermal Barrier Coatings in Gas Burner Thermal Cycling Rig Environment
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ;
Physical Characterization of Y2O3 - CeO2 - TiO2 (YCT) Mixed Oxides and Ni/YCT Cermets as Anode Electrodes in Solid Oxide Fuel Cells
Proceedings of the 10th International Conference of the European Ceramic Society (ECerS-10) / ed.: J. G. Heinrich, C. G. Aneziris. - The European Ceramic Society, 2008. - S. 749 - 754 (2008)

; ;
Study on the detection of melting temperatures and sources of errors using two-color pyrometry for in-flight particle measurements
Thermal Spray 2008 : Thermal Spray Crossing Borders, 02.-04.06.2008, Maastricht, The Netherlands / ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag, 2008. - CD, O.Z. (2008)

; ; ; ; ; ; ;
Characterization of La0.8Sr0.2(Co,Cu,Fe)O3 Perovskites as a Cathode Contact Material for Solid Oxide Fuel Cells
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0918 (2008)

; ; ; ; ; ; ; ;
Coatings on Crofer22APU Interconnect for Protecting La0.8Sr0.2Fe0.8O3 Cathode in Solid Oxide Fuel Cells
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0901 (2008)

; ; ;
The Application of Laser Topography in SOFC Development
8th European SOFC Forum, June 30th - July 4th 2008, Lucerne, Switzerland. - 2008. - CD, paper no. A0301 (2008)

; ; ;
Porous Titanium for Dental Implant Applications
Metfoam 2007 (Porous Metals and Metallic Foams) / ed.: L. P. Lefebvre, J. Banhart, D. C. Dunand. - DEStech Publications, 2008. - S. 259 - 262 (2008)

; ;
Improving the conduction properties of supported protonic thin-films produced through solid state reaction
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: 3C03 (2008)

; ; ;
Improvement of SOFC cathode performance through catalytic promotion and nanostructuring approaches
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: I-P52 (2008)

; ; ;
Solid Oxide Fuel Cells (SOFCs) - The Everlasting Challenge for High-Performance Ceramics
Global Roadmap for Ceramics : proceedings of the 2nd International Congress on Ceramics, June 29 - July 4, 2008 / ed.: A. Bellosi, G. N. Babini. - S. 537 - 547 (2008)

; ; ; ; ; ; ;
Optimizing of the Reflectivity of Air Plasma Sprayed Ceramic Thermal Barrier Coatings
31st International Cocoa Beach Conference on Advanced Ceramics and Composites, 21.-26.01.07, Daytona Beach, FL, USA / ed.: J. Salem, Z. Dongming, H.-T. Lin, U. Schulz. - 2007. - (Ceramic Engineering and Science Proceedings ; 28,3). - S. 99 - 113 (2008)


Solid Oxide Fuel Cells
Encyclopedia of Materials: Science and Technology / ed.: K. H. J. Buschow, R. W. Cahn, M. C. Flemings, B. Ilschner, E. J. Kramer, S. Mahajan, P. Veyssière. - Oxford, Elsevier, 2008. - Neuaufl. - 978-0-08-043152-9. - S. 1 - 8 (2008) [10.1016/B978-008043152-9.02210-7]  GO

;
Wettability studies and their influence on SOFC development
Proceedings of the 2nd International Congress on Ceramics - Global Roadmap for Ceramics / ed.: A. Bellosi, G. N. Babini. - National Research Council, 2008. - S. 299 - 308 (2008)

; ; ; ; ; ;
Gasseparations-Membranen mit nanostrukturierten Funktionsschichten für die CO2-Abtrennung bei Post-combustion Capture und die H2-CO2-Trennung bei Pre-combustion Kohlekraftwerken
Der 4. Deutsche Wasserstoff Congress 2008 - Tagungsband / ed.: D. Stolten, B. Emonts, T. Grube. - Jülich, Forschungszentrum, Zentralbibliothek, 2008. - (Schriften des Forschungszentrums Jülich . Reihe Energie & Umwelt / Energy & Environment ; 12). - 978-3-89336-533-3. - S. 103 - 112 (2008)

; ;
Manufacturing of microporous ceramic membranes for environmental applications
Innovation for Sustainable Production, Brugge, 22. - 25. April 2008 : Conference Proceedings. - 2008. - S. 107 - 111 (2008)

; ; ; ; ; ;
High performance solid oxide fuel cells (SOFCs) made by atmospheric plasma spraying (APS)
Thermal Spray 2008 (ITSC 2008) : Thermal Spray Crossing Borders, 02.-04.06.2008, Maastricht, The Netherlands. - ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ; ; ; ;
Functionally Graded Thermal Barrier Coatings
10th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials 2008, Sendai International Center, Sendai, Japan. - 2008. - o.Z. (2008)

Dissertationen 2008


Neue Ansätze zur Vorhersage der Lebensdauer von plasmagespritzten Wärmedämmschichten durch Simulation von Risswachstum unter Einbindung der Schichtmikrostruktur
(2008)


Einfluss von Reoxidationszyklen auf die Betriebsfestigkeit von anodengestützten Festoxid-Brennstoffzellen
Schriften des Forschungszentrums Jülich (2008)


Herstellung von Hochtemperatur-Brennstoffzellen über physikalische Gasphasenabscheidung
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 32, (2008)


Entwicklung neuer Schutz- und Kontaktierungsschichten für Hochtemperatur-Brennstoffzellen
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 3, (2008)


Sinterung von Zirkoniumdioxid-Elektrolyten im Mehrlagenverbund der oxidkeramischen Brennstoffzelle (SOFC)
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 9, (2008)


Entwicklung und Charakterisierung von Zahnimplantaten mit definierter Porosität und biokompatiblen Beschichtungen
Berichte des Forschungszentrums Jülich 4268, (2008)


Optimierung der Reflektivität keramischer Wärmedämmschichten aus Yttrium-teilstabilisiertem Zirkoniumdioxid für den Einsatz von metallischen Komponenten in Gasturbinen
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 4, (2008)


Inorganic Microporous Membranes for Gas Separation in Fossil Fuel Power Plants
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 8, (2008)


Nickelreaktivlot / Oxidkeramik-Fügungen als elektrisch isolierende Dichtungskonzepte für Hochtemperatur-Brennstoffzellen-Stacks
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 30, (2008)

Tagungsberichte 2008

; ;
Suface activated OTM for CO_2 emission free fossil power plants
Proceedings of the 12th Aachener Membran Kolloquium, 29.-30.10.2008, Aachen, Germany. - 2008. - 978-3-00-026060-5. - S. 317 - 322 (2008)

; ; ; ; ;
Influence of membrane thickness and activating layers on oxygen permeation of Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-delta) (BSCF) membranes
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: I-P55 (2008)

; ; ; ; ;
Current Trends of SOFC Development at Forschungszentrum Jülich
Proceedings of the 8th European SOFC Forum, Luzern, Schweiz, 2008 : EFCF 2008. - 2008. - CD, B0306 (2008)

; ; ; ; ;
Wettability and Interfacial Reaction between Glass Sealants and Ferritic Steel Interconnects in SOFCs
Proceedings of the 10th International Conference of the European Ceramic Society (ECerS-10) / ed.: J. G. Heinrich, C. G. Aneziris. - The European Ceramic Society, 2008. - S. 871 - 879 (2008)

; ; ; ;
Adaption keramischer Fertigungstechnologien für pulvermetallurgische Funktionsbauteile
27. Hagener Symposium 2008 : Neue Anforderungen - Neue Produkte - Neue Verfahren / ed.: H. Kolaska. - Witten, Heimdall-Verlag, 2008. - (Pulvermetallurgie in Wissenschaft und Praxis ; 24). - S. 215 - 241 (2008)

; ; ; ;
Applicability of 2C-MIM to produce near-net-shape components with graded porosity
Proceedings of EURO-PM 2008, Mannheim, Germany. - 2008. - S. 21 - 26 (2008)

; ; ; ;
Stack degradation in dependence of operation parameters; the Real-SOFC sensitivity analysis
Proceedings of the 8th European SOFC Forum 2008, Luzerne, Schweiz. - EFCF, 2008. - CD, B1002 (2008)

; ; ;
Development of nano-structured YSZ electrolyte layers for SOFC applications via sol-gel route
Proceeding 9th International Symposium on Ceramic Materials and Components for Energy and Environmental Application (CMCEE), Shanghai, China, 2008 (2008)

; ; ;
Preparation of thin graded YSZ Layers via sol-gel route
Proceedings of the 7th European SOFC Forum, Lucerne, Switzerland, June 30 - July 4, 2008 (2008)

; ;
Investigation of electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr
Electroceramics XI : CD-Tagungsband. - The European Ceramic Society, 2008. - Datei 0103 (2008)

; ; ; ; ;
Development of multilayered, nano-structured gas separation membranes supported by a metallic substrate
Proceedings of 10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials 2008, Sendai, Japan. - 2008. - o.Z. (2008)

; ; ; ;
Preparation and Characterisation of Metal-Ceramic Hybrid Membranes
Proceedings of the 12th Aachener Membran Kolloquium, 29.-30.10.2008, Aachen, Germany. - 2008. - 978-3-00-026060-5. - S. 333 - 338 (2008)

; ; ; ;
Preparation and characterization of metal-ceramic hybrid membranes
Proceedings of the 12th Aachener Membran Kolloquium. - 2008. - S. 333 - 338 (2008)

; ; ; ;
Manufacturing and characterisation of metal-supported ceramic membranes for molecular sieving
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: IB04 (2008)

; ;
Development of a Thermally Sprayed Insulation Layer for SOFCc
Proceedings of the 8th European SOFC Forum 2008. - Luzern, Schweiz. - auf CD (2008)

;
Mikrostrukturanalyse der Prozessschritte zur Herstellung hochporöser, endkonturnaher NiTi-Formgedächtnislegierungen
Fortschritte der Metallographie / ed.: M. Rettenmayer, A. Kneissl. - Frankfurt, 2008. - (Praktische Metallographie ; Sbd. 40). - S. 131 - 136 (2008)

; ; ; ;
Relaxation stress behaviour of cylindrical stand alone YSZ coatings with and without segmentation cracks
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ; ; ;
Spraying process, microstructure, and relaxation stress behavior of cylindrical standalone YSZ coatings with and without segmentation
Proceedings of the International Thermal Spray Conference & Exposition 2008 (ITSC) / ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und Verwandte Verfahren, 2008. - S. 1095 - 1098 (2008)

; ; ; ;
Influence of Porosity on Thermal Conductivity and Sintering of Suspension Plasma Sprayed Thermal Barrier Coatings
Proceedings of the 32nd Ínternational Cocoa Beach Conference & Exposition on Advanced Ceramics & Composites, Daytona Beach, Florida, January 2008. - 2008. - CD, o.Z. (2008)

; ; ;
Near-net-shape fabrication of porous NiTi: Use as implant materials and energy-absorbers
i-sup 2008 : Innovation for Sustainable Production ; Conference Proceedings. - 2008. - Online (2008)

; ; ; ; ;
Production of Highly Porous Near-Net-Shape NiTi Components for Biomedical Applications
MetFoam 2007 Conference on Porous Metals and Metallic Foams : Conference Proceedings. - 2008. - S. 295 - 298 (2008)

; ; ; ; ; ;
Use of net-shaped NiTi with a defined porosity as energy-absorbers and implant materials
Proceedings of EURO-PM 2008, Mannheim. - 2008. - S. 101 - 106 (2008)

;
Solid oxide fuel cells based on Y-substituted SrTiO3 ceramic anodes
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0512 (2008)

; ; ; ; ; ;
New Generation Perovskite Thermal Barrier Coating Materials
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ;
Tools for Online Monitoring of Failure Evolution of Thermal Barrier Coatings in Gas Burner Thermal Cycling Rig Environment
ITSC 2008. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ;
Physical Characterization of Y2O3 - CeO2 - TiO2 (YCT) Mixed Oxides and Ni/YCT Cermets as Anode Electrodes in Solid Oxide Fuel Cells
Proceedings of the 10th International Conference of the European Ceramic Society (ECerS-10) / ed.: J. G. Heinrich, C. G. Aneziris. - The European Ceramic Society, 2008. - S. 749 - 754 (2008)

; ;
Study on the detection of melting temperatures and sources of errors using two-color pyrometry for in-flight particle measurements
Thermal Spray 2008 : Thermal Spray Crossing Borders, 02.-04.06.2008, Maastricht, The Netherlands / ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag, 2008. - CD, O.Z. (2008)

; ; ; ; ; ; ;
Characterization of La0.8Sr0.2(Co,Cu,Fe)O3 Perovskites as a Cathode Contact Material for Solid Oxide Fuel Cells
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0918 (2008)

; ; ; ; ; ; ; ;
Coatings on Crofer22APU Interconnect for Protecting La0.8Sr0.2Fe0.8O3 Cathode in Solid Oxide Fuel Cells
Proceedings of the 8th European SOFC Forum / ed.: R. Steinberger-Wilckens. - Oberrohrdorf, Schweiz, European Fuel Cell Forum, 2008. - CD, Datei A0901 (2008)

; ; ;
The Application of Laser Topography in SOFC Development
8th European SOFC Forum, June 30th - July 4th 2008, Lucerne, Switzerland. - 2008. - CD, paper no. A0301 (2008)

; ; ;
Porous Titanium for Dental Implant Applications
Metfoam 2007 (Porous Metals and Metallic Foams) / ed.: L. P. Lefebvre, J. Banhart, D. C. Dunand. - DEStech Publications, 2008. - S. 259 - 262 (2008)

; ;
Improving the conduction properties of supported protonic thin-films produced through solid state reaction
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: 3C03 (2008)

; ; ;
Improvement of SOFC cathode performance through catalytic promotion and nanostructuring approaches
Proceedings of the 10th International Conference on Inorganic Membranes (ICIM10), 18.-22.8.2008, Tokio, Japan. - 2008. - 978-4-904353-01-1. - Paper No.: I-P52 (2008)

; ; ;
Solid Oxide Fuel Cells (SOFCs) - The Everlasting Challenge for High-Performance Ceramics
Global Roadmap for Ceramics : proceedings of the 2nd International Congress on Ceramics, June 29 - July 4, 2008 / ed.: A. Bellosi, G. N. Babini. - S. 537 - 547 (2008)

; ; ; ; ; ; ;
Optimizing of the Reflectivity of Air Plasma Sprayed Ceramic Thermal Barrier Coatings
31st International Cocoa Beach Conference on Advanced Ceramics and Composites, 21.-26.01.07, Daytona Beach, FL, USA / ed.: J. Salem, Z. Dongming, H.-T. Lin, U. Schulz. - 2007. - (Ceramic Engineering and Science Proceedings ; 28,3). - S. 99 - 113 (2008)


Solid Oxide Fuel Cells
Encyclopedia of Materials: Science and Technology / ed.: K. H. J. Buschow, R. W. Cahn, M. C. Flemings, B. Ilschner, E. J. Kramer, S. Mahajan, P. Veyssière. - Oxford, Elsevier, 2008. - Neuaufl. - 978-0-08-043152-9. - S. 1 - 8 (2008) [10.1016/B978-008043152-9.02210-7]  GO

;
Wettability studies and their influence on SOFC development
Proceedings of the 2nd International Congress on Ceramics - Global Roadmap for Ceramics / ed.: A. Bellosi, G. N. Babini. - National Research Council, 2008. - S. 299 - 308 (2008)

; ; ; ; ; ;
Gasseparations-Membranen mit nanostrukturierten Funktionsschichten für die CO2-Abtrennung bei Post-combustion Capture und die H2-CO2-Trennung bei Pre-combustion Kohlekraftwerken
Der 4. Deutsche Wasserstoff Congress 2008 - Tagungsband / ed.: D. Stolten, B. Emonts, T. Grube. - Jülich, Forschungszentrum, Zentralbibliothek, 2008. - (Schriften des Forschungszentrums Jülich . Reihe Energie & Umwelt / Energy & Environment ; 12). - 978-3-89336-533-3. - S. 103 - 112 (2008)

; ;
Manufacturing of microporous ceramic membranes for environmental applications
Innovation for Sustainable Production, Brugge, 22. - 25. April 2008 : Conference Proceedings. - 2008. - S. 107 - 111 (2008)

; ; ; ; ; ;
High performance solid oxide fuel cells (SOFCs) made by atmospheric plasma spraying (APS)
Thermal Spray 2008 (ITSC 2008) : Thermal Spray Crossing Borders, 02.-04.06.2008, Maastricht, The Netherlands. - ed.: E. Lugscheider. - Düsseldorf, Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. - CD, o.Z. (2008)

; ; ; ; ;
Functionally Graded Thermal Barrier Coatings
10th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials 2008, Sendai International Center, Sendai, Japan. - 2008. - o.Z. (2008)

Masterarbeiten 2008


Servicemenü

Homepage