Search

link to homepage

Institute of Energy and Climate Research

Navigation and service


Journals 2011

; ; ; ; ; ; ;
Application of an energy-dispersive pnCCD for X-ray reflectivity: Investigation of interdiffusion in Fe-Pt multilayers
Physica status solidi / A 208, 2601 - 2607 (2011) [10.1002/pssa.201184268]  GO

; ; ; ; ;
Ultrahigh oxygen permeation flux through supported Ba0.5Sr0.5Co0.8Fe0.2O3 membranes
Journal of membrane science 377, (2011) [10.1016/j.memsci.2011.04.050]  GO

; ; ; ; ; ; ; ; ; ;
Testing of nanostructured gas separation membranes in the flue gas of a post-combustion power plant
International journal of greenhouse gas control 5, 37 - 48 (2011) [10.1016/j.ijggc.2010.08.003]  GO

; ; ;
Mechanical Properties of Highly Porous NiTi Alloys
Journal of materials engineering and performance 20, 522 - 528 (2011) [10.1007/s11665-011-9854-y]  GO

; ; ; ;
Interaction of sealing material mica with interconnect steel for solid oxide fuel cells application at 600 degrees C
Journal of power sources 196, 5889 -5896 (2011) [10.1016/j.jpowsour.2011.02.086]  GO

; ; ; ; ; ; ; ; ;
Solid particle erosion of thermal spray and physical vapour deposition thermal barrier coatings
Wear 271, (2011) [10.1016/j.wear.2011.06.013]  GO

; ; ; ;
Mossbauer spectroscopy in the system La(0.8)Sr(0.2)(Mn,Fe,Co)O(3)
Solid state ionics 192, 552 - 556 (2011) [10.1016/j.ssi.2010.06.016]  GO

; ; ; ; ;
Performance analysis of mixed ionic–electronic conducting cathodes in anode supported cells
Journal of power sources 196, 7257 - 7262 (2011) [10.1016/j.jpowsour.2010.11.079]  GO

; ; ; ; ;
Strategies to improve the reliability of anode-supported solid oxide fuel cells with respect to anode reoxidation
Ceramic transactions 227, 101 - 110 (2011) [10.1002/9781118144527.ch11]  GO

; ;
Electrodeposited cobalt coating on Crofer22APU steel for interconnect application in solid oxide fuel cells
Solid state ionics 192, 376 - 382 (2011) [10.1016/j.ssi.2010.03.010]  GO

; ; ;
Columnar-Structured Thermal Barrier Coatings (TBCs) by Thin Film Low Pressure Plasma Spraying (LPPS-TF)
Journal of thermal spray technology 20, 116 - 120 (2011) [10.1007/s11666-010-9549-1]  GO

; ;
Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: Spraying process, microstructure and thermal cycling behavior
Surface and coatings technology 206, 16 - 23 (2011) [10.1016/j.surfcoat.2011.06.032]  GO

; ; ; ; ;
Review on New Developments in Suspension and Solution Precursor Thermal Spray Processes
Journal of thermal spray technology 20, 677 - 695 (2011) [10.1007/s11666-011-9639-8]  GO

; ; ; ; ;
Characterization of porous, net-shaped NiTi alloy regarding its damping and energy-absorbing capacity
Materials science and engineering / A 528, 2454 - 2462 (2011) [10.1016/j.msea.2010.11.055]  GO

; ; ; ; ;
Degradation of anode supported cell (ASC) performance by Cr-poisoning
Journal of power sources 196, 7203 - 7208 (2011) [10.1016/j.jpowsour.2010.10.033]  GO

; ; ; ;
Degradation of solid oxide fuel cell performance by Cr-poisoning
ECS transactions 35, 2009 - 2017 (2011)  GO

; ;
Cyclic voltammetry characterization of a La(0.8)Sr(0.2)Co(0.2)Fe(0.8)O(3) (-) (delta) electrode interfaced to CGO/YSZ
Solid state ionics 197, 13 - 17 (2011) [10.1016/j.ssi.2011.06.007]  GO

; ;
Stress Distributions in Plasma-Sprayed Thermal Barrier Coatings Under Thermal Cycling in a Temperature Gradient
Journal of applied mechanics 78, 1 - 9 (2011) [10.1115/1.4002209]  GO

; ; ; ;
Mechanical Characterization of Porous Ba0.5Sr0.5Co0.8Fe0.2O3d
Journal of the European Ceramic Society 31, 2997 - 3002 (2011) [10.1016/j.jeurceramsoc.2011.07.002]  GO

; ; ;
Electrochemical performances of solid oxide fuel cells based on Y-substituted SrTiO3 ceramic anode materials
Journal of power sources 196, 7308 - 7312 (2011) [10.1016/j.jpowsour.2010.07.094]  GO

; ;
Nonstoichiometric Y-substituted SrTiO3 materials as anodes for solid oxide fuel cells
Solid state ionics 192, 535 - 539 (2011) [10.1016/j.ssi.2010.03.027]  GO

; ;
Slow Crack Growth and Creep Rupture of Ba0.5Sr0.5Co0.8Fe0.2O3-d
Key engineering materials 488-489, 303 - 306 (2011) [10.4028/www.scientific.net/KEM.488-489.303]  GO

; ; ; ; ; ; ;
Improving Powder Injection in Plasma Spraying by Optical Diagnostics of the Plasma and Particle Characterization
Journal of thermal spray technology 20, (2011) [10.1007/s11666-010-9577-x]  GO

; ;
Plasma and Particle Temperature Measurements in Thermal Spray: Approaches and Applications
Journal of thermal spray technology 20, 391 - 406 (2011) [10.1007/s11666-010-9603-z]  GO

;
Current developments and challenges in thermal barrier coatings
Surface engineering 27, 477 - 479 (2011) [10.1179/1743294411Y.0000000013]  GO

; ; ; ;
Post-test characterization of an SOFC short stack after 17,000 hours of steady operation
ECS transactions 35, 195 - 206 (2011)  GO

; ; ; ; ;
Preparation of functional layers for anode-supported solid oxide fuel cells by the reverse roll coating process
Journal of power sources 196, 9528 - 9535 (2011) [.1016/j.jpowsour.2011.07.063]  GO

; ; ; ; ; ;
Gas phase deposition of diffusion barriers for metal substrates in solid oxide fuel cells
Institute for Fuel Cell Innovation, NRC, 4250 Wesbrook Mall, Vancouver, Canada V6T 1W5 Surface and coatings technology 205, 3999 - 4004 (2011) [10.1016/j.surfcoat.2011.02.021]  GO

; ; ; ; ; ;
Thermal Stability of the Cubic Phase in Ba0.5Sr0.5Co0.8Fe0.2O3- (BSCF)
Solid state ionics 197, 25 - 31 (2011) [10.1016/j.ssi.2011.06.010]  GO

; ;
Mechanical Properties and Lifetime Predictions for Ba0.5Sr0.5Co0.8Fe0.2O3 Membrane Material
Journal of membrane science 385-386, 263 - 268 (2011)  GO

; ;
Enhanced Characteristics of HVOF sprayed MCrAlY Bond Coats for TBC Applications
Journal of thermal spray technology 20, 1209 - 1216 (2011) [10.1007/s11666-011-9668-3]  GO

; ; ; ;
Mechanical properties of thermally sprayed Fe based coatings
Materials science and technology 27, 973 - 982 (2011) [10.1179/1743284710Y.0000000002]  GO

; ; ; ;
Diffusion and Phase Transformation at the Interface between an Austenitic Substrate and a Thermally Sprayed Coating of Ledeburitic Cold-Work Tool Steel
Steel research international 82, 671 - 682 (2011) [10.1002/srin.201000199]  GO

; ; ; ;
Influence of Thermal History on the Cubic-To-Hexagonal Phase Transformation and Creep Behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3 Ceramics
Journal of membrane science 381, (2011) [10.1016/j.memsci.2011.07.036]  GO

; ; ; ; ;
Electronic conductivity of Ce(0.8)Gd(0.2-x)Pr(x)O(2-delta) and influence of added CoO
Article first published online: 7 OCT 2010 Physica status solidi / B 248, 314 - 322 (2011) [10.1002/pssb.201046365]  GO

; ; ; ; ;
Recent Results in Solid Oxide Fuel Cell Development at Forschungszentrum Jülich
Solid Oxide Fuel Cells 12 (SOFC-XII) ECS transactions 35, 53 - 60 (2011) [10.1149/1.3569978]  GO

; ;
Heißer ist besser - Kraftwerke umweltschonender machen
Rubin (2011)  GO

; ; ; ;
Electrode and Electrolyte Layers for Solid Oxide Fuel Cells Applied by Physical Vapor Deposition (PVD)
ECS transactions 35, 2275 - 2282 (2011)  GO

; ; ; ;
Nano-structured solid oxide fuel cell design with superior power output at high and intermediate operation temperatures
Microsystem technologies 17, 233 - 242 (2011) [10.1007/s00542-011-1257-3]  GO

;
Emerging and Innovative Processes in Thermal Spraying
Journal of thermal spray technology 20, 645 (2011) [10.1007/s11666-011-9656-7]  GO

; ; ;
Properties of tape cast Y-substituted strontium titanate for planar anode substrates in SOFC applications
Journal of materials science 46, 3493 - 3499 (2011) [10.1007/s10853-011-5255-8]  GO

; ; ; ; ; ;
Chemical Compatibility Investigation of Thin-Film Oxygen Transport Membranes on Metallic Substrates
Journal of the American Ceramic Society 94, 861 - 866 (2011) [10.1111/j.1551-2916.2010.04171.x]  GO

; ; ; ;
Interdiffusion in Fe/Pt Multilayers: In situ high temperature synchrotron radiation reflectivity study
Advanced engineering materials 13, 475 - 479 (2011) [10.1002/adem.201000358]  GO

Articles in Books 2011

;
Wärmedämmschichtsysteme für Gasturbinen - Mikrostruktur, Schädigung und Zuverlässigkeit
RWTH Themen Werkstoffe 1(S. 32 - 24), (2011)

; ; ;
Hot isostatic pressing of NiTi-X (X=Ag,Nb,W) alloys for functional engineering applicataions
Proceedings of EURO PM 2011, 09.-12.Oktober 2011, Barcelona, Spain, Vol. 2 (2011). - S. 369 -374 (2011)

; ; ; ; ;
Development of metal supported gas separation membranes
Proceedings of EURO PM 2011,09.-12.10.2011, Barcelona, Spain, Vol. 3, 407-411 (2011)

; ; ;
Mechnische Eigenschaften von hochporösen NiTi Legierungen
Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, ed. B.Wielage, 30.03.-01.04.2011, Chemnitz, Germany, S. 525 - 530 (2011)

; ; ;
2-component-MIM parts with a functional gradient in porosity
Proceeding of Int.Conf. on Powder Metallurgy & Particulate Mat, ed. MPFI, 18.-21.05.2011, San Francisco, California, USA, Vol.4, (2011). - S. 157 - 171 (2011)

; ; ;
Failure mechanism of non-stoichiometric Mg-Al-Spinel abradable coatings under thermal cyclic loading
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ; ; ; ; ;
Development of Metal-Supported Solid Oxide Fuel Cells
ECS Transactions Volume 35-1 (SOFC-XII), ed./: S.C. Singhal, K. Eguchi, Pennington, The Electrochemical Society, 2011. - S. 343 - 350. (2011)

; ; ;
Deposition and characteristics of submicrometer-structured ceramic coatings by suspension thermal spraying,
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ;
Is chronium poisoning of LSM cathodes avoidable?
Proceedings of SOFC-XII Symposium, 219th ECS Meeting, Montreal, Kanada, 01.05. - 06.05.2011 (2011)

; ; ; ; ; ;
Herstellung metallgestützter Gastrennmembranen für fortschrittliche Kraftwerkskonzepte
Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, ed. B.Wielage, 30.03.-01.04.2011, Chemnitz, Germany, S. 628 - 633 (2011)

;
Untersuchung von gasphasenabgeschiedenen, kolumnaren Plasmaspritzschichten
DGM 45. Materialographie-Tagung, Karlsruhe, 14.09.2011 - 16.09.2011 (2011)

; ; ;
Characteristics of Ceramic Coatings Made by Thin Film Low Pressure Plasma Spraying (LPPS-TF)
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ;
Ferromagnetic Thermal Load- and Depletion-Sensor for MCrAlY Coatings
Proceedings of the Eurocorr 2011, 04.-08.09.2011, Stockholm. S. 313 (2011)

; ; ; ;
Advanced thermal barrier coatings from Ti-doped YSZ systems
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, USB-Stick (2011)

; ;
Membranen zur CO2-Abtrennung
Kohlendioxid CO2 - Facetten eines Moleküls, Hrsg. Deutsche Bunsen-Gesellschaft für Physikalische Chemie. - 978-3-980969-1-4-7 (2011). S. 37 - 39 (2011)

; ; ;
Impedance studies on solid oxide fuel cells with Yttrium-substituted SrTiO3 ceramic anodes
ECS Transact. 35 (1) (2011) 1421-1433 (2011)

; ; ; ;
Development of Plasma Spray Parameters for Ceramic Coatings in Gas Turbines
Proceedings of the 24th International Conference on Surface Modification Technologies (SMT 24), September 7-9, 2010, Dresden,. Ed./ T.S. Sudarshan, E. Beyer, L.M. Berger, Valardocs, Chennai, India, 2011. - S. 35 - 46 (2011)

; ; ;
Improving Atmospheric Plasma Spraying of Zirconate Thermal Barrier Coatings Based on Particle Diagnostics
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB-Stick (2011)

; ; ; ; ; ;
Advanced manufacturing technology for solid oxide fuel cells
CD-ROM Proceedings of the 35th International Conference on Advanced Ceramics and Composites, 23.-28.01.2011, Daytona Beach, USA, Paper 4-14, 1-12 (2011)

; ; ; ; ; ; ; ; ;
Reducing Degradation Effects in SOFC Stacks Manufactured at Forschungszentrum Jülich
Advances in Solid Oxide Fuel Cells III Book, Series Ceramic Engineering and Science, / ed.: N.P. Bansal, Vol. 28(4), 2010. - S. 65 - 77 (2011)

; ; ; ; ;
Metal-Supported Cells with Comparable Performance to Anode-Supported Cells in Short-Term Stack Environment
ECS Transactions Volume 35-1 (SOFC-XII), ed./: S.C. Singhal, K. Eguchi, Pennington, The Electrochemical Society, 2011. - S. 259 - 268 (2011)

; ; ; ; ;
Influence of flue gas components on the chemical properties of the ceramic materials (Co-)Ce0,8Gd0,2-xPrxO2-δ
IOP Conference Series: Materials Science and Engineering 18 (SYMPOSIUM 4)
3rd International Congress on Ceramics, ICC3, Osaka, Japan, 11/14/2010 - 11/18/2010
072005 (2011)  GO

; ; ; ; ;
Recent Results in Solid Oxide Fuel Cell Development at Forschungszentrum Juelich
Proceedings SOFC XII,Montreal, 01.-06.05.2011 ECS Transactions Volume 35-1, ed.:/ S.C. Singhal, K. Eguchi, Pennington (2011)

; ; ; ; ;
Recent Results in Solid Oxide Fuel Cell Development at Forschungszentrum Juelich
Solid Oxide Fuel Cells 12 (SOFC-XII), p.19-29. (2011)

; ; ; ;
The influence of CMAS attack on the lifetime of thermal barrier coatings
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ; ;
pO2 stability of Ba0.5Sr0.5Co0.8Fe0.2O3-delta
Material Research Society Symposium Proceedings, Vol. 1309, Materials Research Society, 2011. - S. 57 - 64 (2011) [10.1557/opl.2011.419]  GO

; ; ; ;
Deposition of La-Sr-Fe-Co perovskite coatings with different microstructures by low pressure plasma spraying
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

Dissertations 2011


Development of the 2-Component-Injection Moulding for Metal Powders
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 127, (2011)


Improved hydrogen sorption kinetics in wet ball milled Mg hydrides
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 93, (2011)


Entwicklung geträgerter Ba0,5Sr0,5Co0,5Fe0,2O3 Sauerstoff-Permeationsmembranen
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 126, (2011)


Development of Thin Film Oxygen Transport Membranes on Metallic Supports
Schriften des Forschungszentrums Jülich : Energie & Umwelt / Energy & Environment 130, (2011)

Proceedings 2011

;
Wärmedämmschichtsysteme für Gasturbinen - Mikrostruktur, Schädigung und Zuverlässigkeit
RWTH Themen Werkstoffe 1(S. 32 - 24), (2011)

; ; ;
Hot isostatic pressing of NiTi-X (X=Ag,Nb,W) alloys for functional engineering applicataions
Proceedings of EURO PM 2011, 09.-12.Oktober 2011, Barcelona, Spain, Vol. 2 (2011). - S. 369 -374 (2011)

; ; ; ; ;
Development of metal supported gas separation membranes
Proceedings of EURO PM 2011,09.-12.10.2011, Barcelona, Spain, Vol. 3, 407-411 (2011)

; ; ;
Mechnische Eigenschaften von hochporösen NiTi Legierungen
Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, ed. B.Wielage, 30.03.-01.04.2011, Chemnitz, Germany, S. 525 - 530 (2011)

; ; ;
2-component-MIM parts with a functional gradient in porosity
Proceeding of Int.Conf. on Powder Metallurgy & Particulate Mat, ed. MPFI, 18.-21.05.2011, San Francisco, California, USA, Vol.4, (2011). - S. 157 - 171 (2011)

; ; ;
Failure mechanism of non-stoichiometric Mg-Al-Spinel abradable coatings under thermal cyclic loading
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ; ; ; ; ;
Development of Metal-Supported Solid Oxide Fuel Cells
ECS Transactions Volume 35-1 (SOFC-XII), ed./: S.C. Singhal, K. Eguchi, Pennington, The Electrochemical Society, 2011. - S. 343 - 350. (2011)

; ; ;
Deposition and characteristics of submicrometer-structured ceramic coatings by suspension thermal spraying,
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ;
Is chronium poisoning of LSM cathodes avoidable?
Proceedings of SOFC-XII Symposium, 219th ECS Meeting, Montreal, Kanada, 01.05. - 06.05.2011 (2011)

; ; ; ; ; ;
Herstellung metallgestützter Gastrennmembranen für fortschrittliche Kraftwerkskonzepte
Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, ed. B.Wielage, 30.03.-01.04.2011, Chemnitz, Germany, S. 628 - 633 (2011)

;
Untersuchung von gasphasenabgeschiedenen, kolumnaren Plasmaspritzschichten
DGM 45. Materialographie-Tagung, Karlsruhe, 14.09.2011 - 16.09.2011 (2011)

; ; ;
Characteristics of Ceramic Coatings Made by Thin Film Low Pressure Plasma Spraying (LPPS-TF)
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ;
Ferromagnetic Thermal Load- and Depletion-Sensor for MCrAlY Coatings
Proceedings of the Eurocorr 2011, 04.-08.09.2011, Stockholm. S. 313 (2011)

; ; ; ;
Advanced thermal barrier coatings from Ti-doped YSZ systems
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, USB-Stick (2011)

; ;
Membranen zur CO2-Abtrennung
Kohlendioxid CO2 - Facetten eines Moleküls, Hrsg. Deutsche Bunsen-Gesellschaft für Physikalische Chemie. - 978-3-980969-1-4-7 (2011). S. 37 - 39 (2011)

; ; ;
Impedance studies on solid oxide fuel cells with Yttrium-substituted SrTiO3 ceramic anodes
ECS Transact. 35 (1) (2011) 1421-1433 (2011)

; ; ; ;
Development of Plasma Spray Parameters for Ceramic Coatings in Gas Turbines
Proceedings of the 24th International Conference on Surface Modification Technologies (SMT 24), September 7-9, 2010, Dresden,. Ed./ T.S. Sudarshan, E. Beyer, L.M. Berger, Valardocs, Chennai, India, 2011. - S. 35 - 46 (2011)

; ; ;
Improving Atmospheric Plasma Spraying of Zirconate Thermal Barrier Coatings Based on Particle Diagnostics
International Thermal Spray Conference and Exposition 2011 (ITSC 2011), Hamburg, Germany, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB-Stick (2011)

; ; ; ; ; ;
Advanced manufacturing technology for solid oxide fuel cells
CD-ROM Proceedings of the 35th International Conference on Advanced Ceramics and Composites, 23.-28.01.2011, Daytona Beach, USA, Paper 4-14, 1-12 (2011)

; ; ; ; ; ; ; ; ;
Reducing Degradation Effects in SOFC Stacks Manufactured at Forschungszentrum Jülich
Advances in Solid Oxide Fuel Cells III Book, Series Ceramic Engineering and Science, / ed.: N.P. Bansal, Vol. 28(4), 2010. - S. 65 - 77 (2011)

; ; ; ; ;
Metal-Supported Cells with Comparable Performance to Anode-Supported Cells in Short-Term Stack Environment
ECS Transactions Volume 35-1 (SOFC-XII), ed./: S.C. Singhal, K. Eguchi, Pennington, The Electrochemical Society, 2011. - S. 259 - 268 (2011)

; ; ; ; ;
Influence of flue gas components on the chemical properties of the ceramic materials (Co-)Ce0,8Gd0,2-xPrxO2-δ
IOP Conference Series: Materials Science and Engineering 18 (SYMPOSIUM 4)
3rd International Congress on Ceramics, ICC3, Osaka, Japan, 11/14/2010 - 11/18/2010
072005 (2011)  GO

; ; ; ; ;
Recent Results in Solid Oxide Fuel Cell Development at Forschungszentrum Juelich
Proceedings SOFC XII,Montreal, 01.-06.05.2011 ECS Transactions Volume 35-1, ed.:/ S.C. Singhal, K. Eguchi, Pennington (2011)

; ; ; ; ;
Recent Results in Solid Oxide Fuel Cell Development at Forschungszentrum Juelich
Solid Oxide Fuel Cells 12 (SOFC-XII), p.19-29. (2011)

; ; ; ;
The influence of CMAS attack on the lifetime of thermal barrier coatings
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.09.2011 - 29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

; ; ; ; ; ;
pO2 stability of Ba0.5Sr0.5Co0.8Fe0.2O3-delta
Material Research Society Symposium Proceedings, Vol. 1309, Materials Research Society, 2011. - S. 57 - 64 (2011) [10.1557/opl.2011.419]  GO

; ; ; ;
Deposition of La-Sr-Fe-Co perovskite coatings with different microstructures by low pressure plasma spraying
International Thermal Spray Conference and Exposition 2011 (ITSC 2011) Hamburg, 27.-29.09.2011, DVS-Berichte Vol. 276, DVS Media, Düsseldorf, Germany 2011 auf USB Stick (2011)

Master Theses 2011


Servicemeu

Homepage